Take advantage of current pricing before price increases on the 9th of January 2025.  AGS shop on line is open and processing orders during the Feastive Season.  ShopOnLIne Here
[0]
image
Shop Online

Shield 9mm Synthetic Cricket Pitch

Shield 9mm is a high-quality non-directional cricket grass, recommended by Cricket Australia and well recognised by councils, clubs and schools. If you require a synthetic cricket pitch that’s lively and enables dynamic performance, we have you covered. Over time, the surface will flatten to give a true bounce with an even pace, allowing for competitive conditions that offer assistance for both the fielding and batting sides.

SHIELD 9mm synthetic cricket pitch grass rolls are available in widths of 1.85mts, 2.8mts and 3.7m, and in varying lengths to suit your club’s requirements.

AUD $32.00/psm
Length*
Width*

This product comes with an 8 year manufacturer’s warranty protecting the consumer’s product against UV protection failure, manufacturer’s workmanship, primary and secondary backing failure, unreasonable product deterioration under normal usage circumstances. The warranty does not cover misuses, negligence, incorrect installation methods or use of non-specified chemicals on the surface.

This product is made with a heavy metal free yarn which is protected against UV degradation and light fastness to meet the highest standards.

Shield 9mm

Shield 9mm is a high-quality non directional cricket grass, recommended by Cricket Australia and well recognized by councils, clubs and schools.  If you require a synthetic cricket pitch that’s lively and enables dynamic performance, we have you covered. Over time, the surface will flatten to give a true bounce with an even pace, allowing for competitive conditions that offer assistance for both the fielding and batting sides.
  1. Colour:                      Field Green
  2. Pile Height:              9mm
  3. Stiches Rate:            29 per 10cm
  4. Width:                        Roll width sizes are 1.85, 2.8 and 3.66
  5. Total Weight:           2047 g/m2
  6. Adhesive Req’d:      Approximately 20L every 30m2
  7. Warranty:                 8 years

HOW TO CALCULATE:

GRASS QUANTITY

  1. Australian Industry Standard Roll Widths FOR SHIELD ARE are 1.85, 2.8 and 3.66 mts wide and sold by the lineal metre

INFILL QUANTITY

  1. No infill requirements for Shield

DIRECT ALL OVER STICK

  1. Preference is to install Shield onto a clean concrete surface.
  2. Trowel adhesive evenly over clean concrete
  3. Ensure you allow enough time for any bubbling gas to escape
  4. Use heavy base roller to push out bubbling